China OEM 4G module Suppliers –Silver Electrolytic Copper Expulsion Fuse – HolleyDetail:
Технические характеристики
Продукт Тип |
| EXPULSION FUSE CUT OUT, 27 kV, 150kVBIL, 100 A 8/12kA, 470мм ПУТЬ УТЕЧКИ | EXPULSION FUSE CUT OUT, 38kV, 170kVBIL, 100A, 5/8 kA, 660mm CREEPAGE DISTANCE | EXPULSION FUSE CUTOUT, 27kV, 150kVBIL, 200A, 7.1/10 kA, 432mm CREEPAGE DISTANCE | |
Нет. | Особенности | Единица | Значение | Значение | Значение |
1 | БАЗА |
| |||
| Модель | ХВ1-27/100-8 | ХВ1-38/100-5 | ХВ1-27/200-7.1 | ||
| Стандартный | АНСИ/ИИЭР С 37.40/41/42 МЭК60282- 2:2008 | ANSI C-37.40/41/42 and IEC60282-2 | ANSI/IEEE C37.40/41/42 y IEC60282-2:2008 | ||
| Номинальный ток | A | 100 | 100 | 200 | |
| Номинальное напряжение | kV | 27 | 38 | 27 | |
| Minimum Short Circuit Current | |||||
| - Симметричный | kA | 8 | 5 | 7.1 | |
| - Асимметричный | kA | 12 | 8 | 10 | |
| Minimum isolation level: | |||||
| - Impulse withstand voltage (BIL), phase to ground and between phases. | kV | 150 | 170 | 150 | |
| - Withstand voltage at power frequency between phases, dry, 1 min. | kV | 60 | 80 | 60 | |
| - Withstand voltage at power frequency between phase and ground, in wet, 10s. | kV | 50 | 70 | 50 | |
| Insulating porcelain material of the base with high purity alumina compositions (between 94% to 99%) with the addition of vitrifiers. | Да | Да | Да | ||
| Minimum creepage distance (Phase-Earth) | mm | 470 | 660 | 432 | |
| Контактный материал | Silver electrolytic copper | Silver electrolytic copper | Silver electrolytic copper | ||
| - Minimum thickness of the top contact silver layer (tab) | мкм | 15 | 15 | 15 | |
| - Maximum electrical contact resistance between each terminal and the nearest metal part accessible after contact | Ом | 0.000099 | 0.000099 | 0.000099 | |
| - Upper contact pressure spring with fastening and alignment mechanism | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel according to AISI 304, DIN 1.4301 | ||
| Материал клемм | Луженая медь | Луженая медь | Луженая медь | ||
| -Conductor Range (Diameter) | mm | 4.11-11.35 | 4.11-11.35 | 4.11-11.35 | |
| -Terminals for use with copper or aluminum conductors | Да | Да | Да | ||
| -Тип терминалов | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | ||
| Top support channel material | Galvanized structural steel | Galvanized structural steel | Galvanized structural steel | ||
| - Galvanized Material Standard | АСТМ А575 | АСТМ А575 | АСТМ А575 | ||
| - Стандарт цинкования | АСТМ А153 | АСТМ А153 | АСТМ А153 | ||
| - Minimum average thickness | мкм | 86 | 86 | 86 | |
| Минимальный угол открытия | 120° | 120° | 120° | ||
| Minimum number of mechanical operations guaranteed | Нет. | 200 | 200 | 200 | |
| Minimum mechanical resistance of the horn for load operation | даН | 200 | 200 | 200 | |
| Dimensions (See Figure 1) | |||||
| L | mm | 704 | 842 | 704 | |
| M | mm | 409 | 431 | 409 | |
| N | mm | 476 | 567 | 476 | |
| P | mm | 72 | 82 | 72 | |
| Q | mm | 131 | 147 | 131 | |
2 | ТРУБКА ДЕРЖАТЕЛЯ ПРЕДОХРАНИТЕЛЯ | ||||
| Особенности | |||||
| - Стандартный | АНСИ/ИИЭР С 37.40/41/42 | АНСИ/ИИЭР С 37.40/41/42 | АНСИ/ИИЭР С 37.40/41/42 | ||
| - Номинальное напряжение | kV | 27 | 38 | 27 | |
| - Номинальный ток | A | 100 | 100 | 200 | |
| - Minimum symmetrical/asymmetrical short-circuit current | kA | 8/12 | 5/8 | 7,1/10 | |
| - Internal diameter range | |||||
| - минимум | mm | 11.1 | 11.1 | 17.5 | |
| - максимум | mm | 18 | 18 | 23 | |
| - Length (allowable range) | mm | 375±3 | 466±3 | 375±3 | |
| - Metal parts of joining with the base | Литая бронза | Литая бронза | Литая бронза | ||
| - Fuse holder tube cover (top contact) | Silver electrolytic copper, with a minimum thickness of 8 um | Silver electrolytic copper, with a minimum thickness of 8 µm | Silver electrolytic copper, with a minimum thickness of 8 µm | ||
| - Eye hook for pole operation | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | ||
| - Fuse holder tube material. | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | ||
| - Fuse holder opening and closing mechanism (fuse holder base) | to avoid fuse holder tube un-alignment greater than 15mm | to avoid holder tube un-alignment no more than 15mm | to avoid fuse holder tube un-alignment no more than 15mm | ||
| Suitable for chicote fuses with removable head (Arc shortening rod) | Да | Да | Да | ||
3 | КРЕПЛЕНИЕ АКСЕССУАРОВ | ||||
| - Тип фиксации | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | ||
| - Материал | Оцинкованная сталь | Оцинкованная сталь | Оцинкованная сталь | ||
| - Стандарт материала | АСТМ А575 | АСТМ А575 | АСТМ А575 | ||
| - Стандарт цинкования | АСТМ А153 | АСТМ А153 | АСТМ А153 | ||
| - Minimum average thickness | мкм | 86 | 86 | 86 |
Product detail pictures:
Сопутствующее руководство по продукту:
We can constantly satisfy our respected customers with our good high quality, good price tag and good support due to we have been additional specialist and extra hard-working and do it in cost-effective way forChina OEM 4G module Suppliers –Silver Electrolytic Copper Expulsion Fuse – Holley, The product will supply to all over the world, such as: Slovenia, Bangladesh, United States, By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.
